Idiomas disponibles
Idiomas disponibles
EN
30
GETTING STARTED
Installation
•
Unpack the device and all parts and remove the protective packaging
and film.
•
Do not connect the device to the power source until all other necessary
connections have been made.
•
Do not cover the air vents. Please make sure that there are a few
centimetres of clearance on all sides of the device.
Attach cover
•
Push the metal clips to the back.
•
Connect the cover to the metal clip.
•
Connect the cover hinge to the main unit.
Power connection
•
Connect the power cord (35) to a power outlet and connect the
speakers to the speaker connector (33).
•
Turn on the device by turning the knob (19) until it clicks.
•
Set the function selector switch (6) to "Tuner" and the display (2) will
turn on. The device is now ready for operation and can play music.
RADIO
Manual channel search:
•
Set the function selection button (6) to "Tuner" and select the desired
band with the band selector switch (10).
•
Turn the frequency control (18) to get the desired station.
•
Adjust the volume with the volume control (19).
FM stereo reception:
•
Set the tape selector switch (10) to FM and the radio stations will be
received in mono. In some cases, this improves the reception of weak
transmitters.
•
Set the tape selector switch (10) to FM-St and the radio stations will be
received in stereo. The FM-St LED now lights up.
