Princess 242120 Manual De Instrucciones página 23

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
Replacing the anti-scaling filter
(fig. A, D & E)
The anti-scaling filter (ACF 30) is available
from our service station. The anti-scaling filter
removes chlorine and other contaminants from
the water for a pure coffee taste.
The anti-scaling filter must be replaced every
three months at an average daily consumption
of 8 cups of coffee (approximately 700 cups).
Remove the water reservoir (13) from the
appliance.
Remove the lid (18) from the water
reservoir (13).
Remove the anti-scaling filter (14) from the
water reservoir (13).
Remove the anti-scaling filter (14) from the
filter holder (17) and the ring (16).
Rinse the new anti-scaling filter (14) under
running water.
Insert the anti-scaling filter (14) into the ring
(16).
Place the filter holder (17) on the ring (16).
Lock the filter holder (17) by turning it
clockwise.
Place the anti-scaling filter (14) in the water
reservoir (13). Lock the anti-scaling filter
(14) by pressing it down until it clicks into
place.
Place the lid (18) on the water reservoir
(13).
Place the water reservoir (13) in the
appliance.
The time interval for the next filter replacement
can be set using the anti-scaling filter
replacement indicator (15).
Turn the anti-scaling filter replacement
indicator (15) clockwise to set the next time
interval for replacement of the anti-scaling
filter.
Descaling (fig. A, C, E & L)
The appliance must be descaled regularly.
The appliance has an automatic descaling
indicator which informs the user when
descaling is required. If the on/off button
flashes yellow, the appliance must be
descaled. It is still possible to brew coffee and
prepare hot water, but milk frothing is no
longer possible.
The automatic descaling program of the
appliance is optimised to be used for 125 ml of
durgol
swiss espresso
®
undiluted, is highly effective and guarantees a
reliable descaling and therefore a long
operational life of the appliance. The descaling
agent is available from our service station.
Warning! Be careful when descaling the
appliance to prevent damage to furniture or
clothing. Use cups that are as large as
possible and place the cups under the
respective dispensers in such a way as to
prevent splatters.
Caution!
Only use durgol
®
specified quantity to descale the appliance.
Do not use vinegar or vinegar concentrate
to descale the appliance.
Do not use citric acid to descale the
appliance.
Hardness range setting
The appliance can be set to various water
hardness settings. The factory setting of the
water hardness is 4. Contact your waterworks
company or your local authorities for the water
hardness range in your area. If the water
hardness range in your area is lower than 4,
the water hardness setting can be changed to
reduce the number of times that the appliance
must be descaled.
Use the on/off button (1) to set the
appliance to the water hardness in your
area. Refer to the table below to set the
correct water hardness range.
Flashing signal
of on/off button
•••
••• •••
••• ••• •••
••• ••• ••• •••
Press the on/off button (1) to switch off the
appliance.
23
. The product is used
®
swiss espresso
in the
®
Water
Water
hardness
hardness
range
(°dH)
1 (soft)
0 - 7
2 (medium)
7 - 14
3 (hard)
14 - 21
4 (very hard)
above 21
loading