Idiomas disponibles
Idiomas disponibles
Status
All LEDs show in sequence, followed by one (1)
LED quick-flashing yellow.
All LEDs show in sequence, followed by one (1)
LED showing constantly red.
4
Technical data
4.1
Product properties
Rated voltage
Weight without battery
Speed
Torque (soft joint)
Ambient temperature for operation
Storage temperature
4.2
Accessory tools – permissible diameters
Ø range of keyless chuck
Ø wood drill bits (hardwood)
Ø wood drill bits (softwood)
Ø drill bits for metal
4.3
Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5
Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
8
English
Meaning
The check to ascertain the battery's state of health
did not complete. Repeat the procedure, or consult
Hilti Service.
If a connected product can still be used, the re-
maining battery capacity is below 50 %.
If a connected product can no longer be used, the
battery has reached the end of its useful life and
has to be replaced. Consult Hilti Service.
21.6 V
2.0 kg
(4.4 lb)
0 /min ... 490 /min
1st gear
0 /min ... 2,000 /min
2nd gear
≤ 65 Nm
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 70 ℃
(−4 ℉ ... 158 ℉)
1/16 in ... 1/2 in
1/16 in ... 3/4 in
1/16 in ... 1 1/4 in
1/16 in ... 1/2 in
21.6 V
See the end of these operating
instructions
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 40 ℃
(−4 ℉ ... 104 ℉)
−10 ℃ ... 45 ℃
(14 ℉ ... 113 ℉)
2368266
*2368266*
