Idiomas disponibles
Idiomas disponibles
CHANGING THE OIL
Make sure the fryer and the oil or fat have cooled down bef ore changing the oil or fat (remove the plug from
the socket). Change the oil and the synthetic filter regularly. This is particularly necessary when the oil or fat
goes dark or the smell changes. Always change the oil after every 10 frying sessions. Change the oil in one
go - never mix old and new oil. Used oil is harmful to the environment. Do not dispose of it with your normal
rubbish but follow the guidelines issued by the local authorities.
CLEANING AND MAINTENANCE
Never immerse the appliance in water! Remove the plug from the socket.
- All the non-electrical parts except the synthetic filter can be washed in warm soapy water. Dry thoroughly
before reusing.
- We do not recommend that you wash the parts in the dishwasher.
- Clean both inside and outside the fryer regularly.
- Regularly clean the outside of the fryer with a damp cloth and dry it with a soft, clean towel.
- Do not use abrasive detergents.
- When replacing the oil, you can also clean the inside of the fryer. Empty the fryer and first clean the inside
with a paper towel and then wipe with a wet cloth dipped in soapy water. Then wipe the inside with a damp
cloth and allow it to dry.
PRINCESS TIPS
- Always place the fryer on a stable surface and keep flammable materials away.
- Do not place the fryer on or near a switched-on hot plate.
- Bef ore you use the fryer it must be filled with the required amount of fat or oil. Never use the fryer without
oil or fat as this will break the appliance.
- Never move the appliance during use. The oil becomes hot and you can burn yourself. Wait until the oil has
cooled down before moving the fryer.
- Never immerse the appliance in water!
- Do not leave the appliance unattended while in use. Close supervision is necessary when the fryer is used
near children.
- Do not use the appliance if the cord is damaged. Send it to our service department to minimise any risk. With
this type of appliance, a damaged cord should only be replaced by our service department using special tools.
- Make sure the thin pipes running along the heating element are not damaged (do not dent or bend).
- The electrical part comes complete with a safety switch which ensures that the heating element can only
operate when the element is correctly positioned in the pan.
- Never use previously defrosted and subsequently refrozen pro-
ducts. These contain a lot of water which will cause excessive
spattering.
- Children should be supervised to ensure that they do not play
with the appliance.
- The use of this appliance by children or persons with a physical,
sensory, mental or motorial disability, or lack of experience and
knowledge can give cause to hazards. Persons responsible for
their safety should give explicit instructions or supervise the use
of the appliance.
- While heating up and frying, do not keep the lid on the
appliance to prevent condensation.
In the case of overheating, the pan will switch off automatically.
This safety mechanism can be found on the bottom of the
electrical part. If its switches off, it can be reactivated by
pressing in the button with a long pointed object. The button
is situated deep behind the hole and you should use the
restart pin supplied. First remove the plug from the socket.
9
