Idiomas disponibles
Idiomas disponibles
Never pull out the power cord beyond the red mark. This could damage the power cord.
6. Insert the plug in the wall socket, and press the On/Off switch. To switch off the appliance, press the
On/Off switch again.
7. The appliance is now ready for use. You can move the vacuum cleaner while you are cleaning by
pulling on the hose grip. You can lift the appliance with the vacuum cleaner's handle.
If so required, you can also reduce the suction quickly by moving the slide on the hose grip.
Accessoiries
This vacuum cleaner is supplied with two accessories:
•
a crevice tool with a narrow nozzle, which you can use to clean radiators, window
frames, crevices, small openings, and similar;
•
A furniture brush, which you can use to clean soft surfaces such as
pholstered furniture and curtains.
oPerAtion - storage after use
1. Remove the plug from the wall socket.
2. Press the rewind button and keep it pressed in; the power cord will automatically rewind onto the reel.
Guide the power cord whilst it rewinds onto the reel, since otherwise the cord could become tangled or
the plug could strike the back of the appliance. Take hold of the power cord near the mark, and allow it
to gently slide through your fingers back into the appliance, see Figure 7.
3. Retract the telescopic tube completely. An attachment slot is fitted to the back of the vacuum cleaner
(see Figure 8). Slide the backside of the combi nozzle into the slot. This avoids the need to dismantle
the vacuum cleaner after use; you can store the assembled appliance and retrieve it again quickly
when you need it.
Figure 8
Storing the vacuum cleaner
Figure 4
Markings on the power cord
Figure 5
On/Off switch
Figure 7
Rewinding the power cord
26
instruction manual
Figure 6
