Idiomas disponibles
Idiomas disponibles
Set up the Camera
Download and Launch the Reolink App or Client software, and follow the
onscreen instructions to finish initial setup.
• On Smartphone
Scan to download the Reolink App.
NOTE: If you are connecting the camera to a Reolink PoE NVR, please set
up the camera via the NVR interface.
5
English
Mount the Camera
Installation Tips
• Do not face the camera towards any light sources.
• Do not point the camera towards a glass window. Otherwise, it may
result in poor image quality because of the window glare caused by
infrared LEDs, ambient lights or status lights.
• Do not place the camera in a shaded area and point it towards a well-lit
area. Otherwise, it may result in poor image quality. To ensure best image
quality, the lighting condition for both the camera and the capture object
should be the same.
• To ensure better image quality, it's recommended to clean the dome
cover with a soft cloth from time to time.
• Make sure the power ports are not directly exposed to water or
moisture and not blocked by dirt or other elements.
• The waterproof camera can work properly under conditions like rain
and snow. However, it doesn't mean the camera can work underwater.
• Do not install the camera at places where rain and snow can hit the lens
directly.
• The camera may work in extreme cold conditions as low as -25°C.
Because when it is powered on, the camera will produce heat. You may
power on the camera indoors for a few minutes before installing it
outdoors.
English
6
