Princess Let's Cook Grill Chef 162266 Manual Del Usuario página 11

U.K. Wiring instructions
The wires in the mains lead are coloured in
accordance with the following code:
BLUE NEUTRAL
LIVE
BROWN
GREEN/YELLOW EARTH
As the colours of the wire in the mains lead of
this appliance may not correspond with the
colour markings identifying the terminals on
your plug, proceed as follows:
The wire which is coloured BLUE must be
connected to the terminal which is marked
with the letter N or coloured black.
The wire which is coloured BROWN must be
connected to the terminal which is marked
with the letter L or coloured red.
The wire which is coloured GREEN/YELLOW
must be connected to the terminal which is
marked with the letter E or (
coloured GREEN or GREEN/YELLOW.
If a 13Amp (BS1363) plug is used, a 13Amp
(BS1362) fuse must be fitted, or if any other
type of plug is used, a 13Amp fuse must be
fitted, either in the plug or adaptor, or on the
distribution board.
Warning! This appliance must be earthed.
Description (fig. A)
Your 162266 Princess Multi Chef has been
designed for grilling, racletting, pan frying and
barbecuing. The appliance is suitable for
indoor use only.
1. Thermostat
2. Thermostat dial
3 Temperature indicator
4. Thermostat socket
5. Grill plate
6. Grill rack
7. Drip tray
8. Pan
9. Spatula
Initial use
Warning! Make sure that there is sufficient
space around the appliance to allow heat to
escape and provide sufficient ventilation.
•
Clean the appliance.
Refer to "Cleaning and maintenance".
•
Clean the accessories.
Refer to "Cleaning and maintenance".
•
Place the appliance on a stable and flat
surface.
•
Insert the mains plug into the wall socket.
•
Switch on the appliance with a high
temperature.
Note: If you switch on the appliance for the
first time, the appliance may emit a little smoke
and a characteristic smell for a short period.
This is normal operation.
•
Allow the appliance to cool down completely.
) and is
Assembly
Warning! Before assembly, always remove
the mains plug from the wall socket.
Mounting the thermostat (fig. A)
The appliance is equipped with a thermostat
that keeps the grill plate or the grill rack at the
required temperature.
•
Insert the thermostat (1) into the thermostat
socket (4).
Mounting the grill plate (fig. B)
The appliance is equipped with a grill plate
with a non-stick coating.
•
Place the grill plate (5) onto the appliance.
Mounting the grill rack (fig. C)
The grill rack can be used for drier and slightly
crispier meat.
•
Place the grill rack (6) onto the appliance.
Use
Switching on and off (fig. A)
•
Insert the mains plug into the wall socket.
•
To switch on the appliance, turn the
thermostat dial (2) to set the required
temperature.
11