Idiomas disponibles
Idiomas disponibles
Before You Begin
CAUTION: Risk of product damage. Do not modify the vanity. Doing so will compromise structural stability.
CAUTION: Risk of personal injury or property damage. Select 500 lb (227 kg) load-bearing 5/16" lag bolts with a
length to clear obstacles in the wall and 5/16" washers. Calculate the proper lag bolt length by adding the following:
1-1/2" (38 mm) backing material, plus the wallboard thickness, plus the back rail thickness.
CAUTION: Risk of property damage. To properly support the weight of the vanity and vanity top/sink, secure to
stud framing or 2x8 support behind the finished wall.
NOTICE: Siliconized acrylic caulk must be used to secure a sink or countertop to the vanity. Do not use 100% silicone
sealant, which will damage the finish of the vanity.
Follow all local plumbing and building codes.
Your product may appear different than the one illustrated. The installation procedure is the same.
Two people should perform this installation.
To ease installation, remove drawers from the vanity before beginning. Refer to the section in this Installation Instructions
for proper removal.
Kohler Co.
3
1533267-2-A
