Dolmar EV-3618 Manual De Instrucciones página 6

– Make sure the switch is off side to prevent unin-
tentional start.
– Check all tools for maintenance, such as
•
replacement parts.
•
•
–
– Do not tilt the machine.
–
– Never let your hands or other part of the body or
Electrical safety
•
socket before use.
•
•
•
•
with live parts and electric shock.
•
•
and cause electric shock.
•
residual current-operated circuit-breaker (RCD) with an
• Use only extension cable for outdoor use with splash-
proofed connector. Its cross-section must be at least
2
1.5mm
• The machine should be connected only to a power
AC supply. They are double-insulated in accordance
with European Standard and can, therefore, also be
used from sockets without earth wire.
•
Operation
•
•
Keep the handle dry and clean to prevent accidents.
•
•
on a slope.
•
•
slope.
• Never work on a steep slope.
•
machine towards you.
•
all times. This enables better control of the machine in
unexpected situations.
6
•
–
– Do not tilt the machine.
–
– Never let your hands or other part of the body or
•
-
•
–
–
–
machine
–
–
the machine cools down. Inspect the machine
operation
–
noise unusually
–
–
–
–
•
– If you have to tilt the machine
–
–
to be worked.
•
immediately after switch off.
Maintenance instructions
• Have your machine serviced by our authorized service
Incorrect repair and poor maintenance can shorten the
2
for
life of the machine and increase the risk of accidents.
•
•
– Shut off the power source
– Disconnect the machine from power supply
–
complete stop
– Allow the machine to cool.
•
– Whether safety devices works properly for its
intended function
–
adequately
–
installed
–
unbalance
–
–
– Replace or repair by our authorized service
• Do not carry out maintenance or repair work other than
that described in this instruction manual. Any other
work must be carried out by Dolmar authorized service
center.