Idiomas disponibles
Idiomas disponibles
CP 116116
7. Check that the means of fitting the fan to the
ceiling is capable of supporting the weight of the
fan when in operation. (Minimum 50Kg.).
FAN COMPONENTS
Roof support
Coupling cover
Lamp
FAN INSTALLATION
1. Position the roof support with the two screws and plugs (depending on the type of roof)
On concrete ceilings, drill two 8mm holes and
insert the screw. Align the bracket with the
hole, and then tighten the nut.
Pass the support bar through the hole in the docking cover and trim.
Trim
Motor
Remote control
On wooden ceilings, fasten the bracket using
Support bar
Blades
Bag of mounting accessories
the 4 screws.
14
