Idiomas disponibles
Idiomas disponibles
2. Attach hydraulic hose (129#) endpoint A to the connector of beam, add O ring Ø11.x2.5 (117#).
3. Attach the clean oil pipe (102#) to the gear pump and secure with clamp (101#).
4. Attach lift cylinder hydraulic hose B (80#) and lift cylinder hydraulic hose A (81#) to the small
control level as picture.
J: ASSEMBLY THE PROTECTION TUBE
1. Attach the log cradle (6#) to the beam using hex bolt M10x45 (7#), large flat washer Ø10 (8#)
and nylon lock nut M10 (9#).
2. Attach the lifting bracket (71#) to the beam using hex bolt M12x80 (91#), flat washer Ø12 (23#),
nylon lock nut M12 (14#).
3. Attach fenders (111# & 107#) to the oil tank using hex bolt M10x30 (112#), flat washer Ø10 (12#),
lock washer Ø10 (11#) and nylon lock nut M10 (9#).
4. Attach the lengthening tow bar assembly (91#) to the tow bar using hex bolt M12x80 (91#), flat
washer Ø12 (23#) and nylon lock nut M12 (14#).
