El/Gel Selection - Quick SBC 300 ADV PLUS FR Manual Del Usuario

PROGRAMMING THE BATTERY CHARGER
PROGRAMMING THE BATTERY CHARGER
The battery charger has the following programmable functions:
• Selecting the battery charge mode - liquid or gel electrolite.
• Selecting the network group.
• Selecting the priority within the network group.
• Activating/deactivating the monitor mode.
Activating programming
Press the button provided on the control panel for 6 seconds in order to activate the programming proce-
dure. Once this time has elapsed, the letter " " will appear steady on the display. At this point, release the
button. The battery charger will pass from one programming function to another in the order given below:

EL/GEL SELECTION

This function enables the charge provided by the battery charger to be optimized according to the type of
batteries used - liquid electrolite or gel.
WARNING: check which battery charging mode has been selected. If the wrong selection is made,
this could reduce the service life of the batteries or mean the charging time takes longer.
The letter " " (liquid Electrolyte) or " " (gel) will appear flashing on the display according to the current
setting.
To change the setting press the key quickly (press and release the button in less than 1 second).
To make the setting operative press the key for at least 2 seconds. The display will confirm the setting by
showing the letter selected for one second (steady).
SELECTING THE NETWORK GROUP
This function enables the user to determine which network group the battery charger belongs to (group "
", " " o " "). Only one battery charger of the SBC ADVANCED PLUS MEDIUM POWER series can belong
to each group. The other devices making up the group can be terminals, sensors or interfaces. A diagram
is given below showing an example of a possible network:
SBC 700
ADVANCED
PLUS
TEMPERATURE
LED
SENSOR,
TERMINAL
BATTERIES 1
GROUP A
CAN NETWORK
TEMPERATURE TEMPERATURE
SENSOR, SENSOR,
BATTERIES 2 BATTERIES 3
GROUP B
SBC 650
ADVANCED
PLUS
TEMPERATURE
CURRENT
SENSOR,
SENSOR TERMINAL
BATTERIES 1
LED
GSM
CURRENT
INTERFACE
SENSOR
GB
GROUP U
LCD
TERMINAL
25