Important - Swiss Pro+ SP-STM10.1WB Manual De Usuario

2. Please refer to the label on the garment to check if the garment can be steamed. Some fabrics such
as leather, suede, and velvet may not be suitable for dry cleaning. If you are not sure, steam a small part
of the inside of the garment to test that it will not damage the fabric before steaming the entire garment
or fabric.
WARNING
1. Never direct steam towards people, animals or plants.
2. Do not touch the garment steamer/cloth during use as these parts can become extremely hot. Keep
the telescopic hose away from your body and do not touch the hose as it can get hot.
When the handheld steamer stops dispensing steam, simply switch off the appliance and remove the
plug from the socket. Refill the water tank and continue cleaning. When you're done cleaning, let the
garment steamer cool down. Carefully remove it from the window cleaning tool as the garment steamer
cloth may still be hot.
Notice:

Do not use this steam mop on windows with frost.

Be careful when using the steamer on glass as it may break.
 Do not use the steamer on leather, waxed furniture, waxed floors, synthetics, velvet or other
delicate, steam sensitive materials.
CAUTION:
Pulling on the telescopic hose with excessive force will damage the hose, potentially
leading to steam leakage.
WARNING
Never leave the steam mop unattended when it is plugged in.
For Best Results:
1. Sweep or vacuum the floor before using the steam mop.
2. To avoid water puddles: The microfibre cloth must be clean and dry before use. To replace the
cleaning cloth, proceed as follows: Allow the cleaning cloth to cool. Remove the cloth from the device,
replace it with a new microfiber cloth (optional item) and continue to use. Select low steam control
position.
3. To sanitize part of your floor, leave the steam mop on a high steam setting over the steaming area for
about 10 seconds, but never longer than 15 seconds.
NOTICE: Do not perform this procedure on heat and steam sensitive floors.

IMPORTANT

 Never steam in one place for too long. This can cause damage to the floor surface.
 Do not place hands or feet under the steam mop. The device becomes very hot.
 A pulsing sound may be heard during use, indicating that the mop is producing steam. This sound
is normal.
 A little bit of water may "spit" that has mixed with the steam. This is also normal.
 The power and heat of the steam can adversely affect certain materials. Always check the
suitability of using the steam mop on a surface by performing a preliminary test on a hidden area.
11