Idiomas disponibles
Idiomas disponibles
Maintenance
Care for an extended period of non-use
Avoid leaving the washer unused for an extended time. If this is the case, drain the washer and unplug the
power cord.
1. Turn the Navigation dial to select Rinse+Spin.
2. Empty the drum, and then tap and hold
3. When the cycle is complete, close the water tap and disconnect the water hose.
4. Turn off the washer, and unplug the power cord.
5. Open the door to let air circulate through the drum.
Cleaning the exterior
1. Turn off the water faucets after finishing the day's washing.
This will shut off the water supply to your washer and prevent the unlikely possibility of damage from
escaping water. Leave the door open to allow the inside of your washer to dry out.
2. Use a soft cloth to wipe up all detergent, bleach or other spills as they occur.
Clean the following as recommended below:
- Control Panel – Clean with a soft, damp cloth.
Do not use abrasive powders or cleaning pads. Do not spray cleaners directly on the panel.
- Cabinet – Clean with soap and water.
Cleaning the interior
Clean the interior of your washer periodically to remove any dirt, soil, odor, mold, mildew, or bacterial
residue that may remain in your washer as a result of washing clothes.
CAUTION
Failure to follow these instructions may result in unpleasant conditions, including odors and/or permanent
stains on your washer or laundry.
NOTE
Hard water deposits may be removed, if needed. Use a cleaner labeled "Washer safe".
54
English
DC68-03645H-01_IB_WW6900B_WASHER-MD_SimpleUX_EN.indd 54
DC68-03645H-01_IB_WW6900B_WASHER-MD_SimpleUX_EN.indd 54
.
2023/6/27 18:56:31
2023/6/27 18:56:31
