Idiomas disponibles
Idiomas disponibles
STEP 5 Connect the drain hose
(*): Min. 6 in. (152 mm), Max. 8 in. (203 mm)
DC68-03645H-01_IB_WW6900B_WASHER-MD_SimpleUX_EN.indd 27
DC68-03645H-01_IB_WW6900B_WASHER-MD_SimpleUX_EN.indd 27
A
*
To a Laundry Tub or Drain Pipe
1. Check the height (A) of your drain system and make
sure the minimum and maximum heights shown
below are met.
Minimum
Maximum
NOTE
• Make sure to measure the height from the floor
where the washer is placed.
• Draining efficiency may be reduced if the drain
system is at the maximum height.
• To prevent the washer from siphoning water, do not
use a drain system below the minimum height.
2. Attach the drain hose to the plastic hose guide (B).
3. Route the drain hose to the drain system.
CAUTION
• If using a standpipe, make sure the standpipe and
drain hose connection is not airtight.
• If using a standpipe, make sure the drain hose is
inserted at least 6 in. (152 mm) but no more than 8
in. (203 mm) into the standpipe.
4. Secure the drain hose with cable ties.
18 in. (46 cm)
96 in. (245 cm)
English 27
2023/6/27 18:56:28
2023/6/27 18:56:28
