Installing The Operator - Erreka CICLON CL210 Manual Del Instalador

4

INSTALLING THE OPERATOR

Assembly positions and levels
This operator can be assembled on either of two types of arm:
• A, slide arm:
A1: inward opening:
N32501 arm with CL210/ CL210F (T2000VFI)/
CLS210F operators;
ACL16 arm with the CL250/CL250F/CLS250F
operators;
A2: outward opening, N32901 arm with the
CL210/ CL210F (T2000VFI)/ CLS210F operators

The installation depends on the type of arm used.
A1: N32501 and ACL16 slide arms for inward opening
500 mm
(1000 mm)
Fig. 4 Example of assembly position with slide arm for inward opening
• B, articulated arm:
100 mm
(80 mm)
610 mm
(990 mm)
ACL16/ N32501
inward opening, N32001 arm with the CL210/
CL210F (T2000VFI)/ CLS210F operators
548 mm
(600 mm)

The
without
correspond to the N32501
arm
CL210F
CLS210F operators.

The
between
correspond to the ACL16
arm
CL250F/CL250 operators.

It is necessary to install
TC closing stopper and
TA opening stopper.
120 mm
I247F1
CICLÓN Electromechanical Operator
INSTALLATION
levels indicated
brackets
with the CL210/
(T2000VFI)/
levels indicated
brackets
with CLS250F/
45