Idiomas disponibles
Idiomas disponibles
5
Installation of appliance
5.6 Installation of Air Baffle (BHCB
63640 BH)
While using with the carbon filter, air baffle is pro-
vided with your appliance with the aim of re-re-
leasing the air which is cleaned with carbon fil-
ter from the perforated located on the Chimney.
Assemble the air baffle as below.
(Figure 13)
There is a tab in the middle of the Chimney con-
nection plate. Place the middle point of this tab on
the line that is drawn perpendicular to the wall.
Align horizontally and mark the holes where the
connection plate will be mounted via a pen (Figure
13/A, B).
Drill the marked points with Ø6mm drill and in-
sert two Ø6mm plastic dowels in the drilled holes
(Figure 13/A, B).
Fix the Chimney connection plate to the wall with
3.9x22 screws (Figure 13/A, B).
For air baffle assembly, install point C, D, E, F with
Ø6mm drill and Ø6mm plastic dowels (Figure 13 ).
(Figure 14)
1. Air Baffle
2. Plastic Chimney
Cooker Hood / User Manual
Attach the plastic Chimney adapter, which is in-
cluded in the package, in the direction of the air
baffle. Lock the Chimney adapter by turning it in
the direction of the arrow (Figure 14).
(Figure 15)
Assemble the air baffle group with 3.9 x 22
screws from point C, D, E, F that you have already
prepared (Figure 13).
Assemble the hood body (Figure 7).
(Figure 16)
1. Aluminium Air Outlet Pipe
1
Make the air outlet pipe assembly (Figure 16).
C
2
Install the Chimney plates of the hood (Figure 12)
Since twists and bends in the alu-
minium pipe will lead to reduction
in the air suction power, avoid using
twists and bends as much as pos-
sible.
15 / EN
