Samsung WA44A32 A Serie Manual Del Usuario página 54

Troubleshooting
Code
Water is overflowed.
•
OC
•
When position of the clutch can't be detected.
PC
•
After position of the clutch is detected, if the signal of the clutch hall goes
PC1 wrong.
•
Spinning does not work.
•
•
•
Ub
1. shown in the display.
Additional rinsing.
•
Ur
•
Any key input.
Firmware update is in progress through SmartThings.
•
dn
•
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG).
54 English
WA3200T_DC68-03850D-04_EN.indd 54 WA3200T_DC68-03850D-04_EN.indd 54
Restart after spinning.
If the information code remains on the display, contact a local Samsung
service centre.
If the information code remains, contact a customer service centre.
If the information code remains, contact a customer service centre.
Make sure laundry is spread out evenly.
Make sure the washing machine is on a flat, stable surface.
Redistribute the load. If only one item of clothing needs washing, such as
a bathrobe or pair of jeans, the final spin result might be unsatisfactory,
and an "Ub" check message will be
Show additional rinsing in sensing unbalance.
Method of releasing the display.
To use the product, wait about 30 minutes until the firmware update
completes. (The time required to complete the firmware update may vary
depending on your Internet connection.)
This code will remain on the display, regardless of power on and off, until
the firmware update is complete.
Meaning
2022-06-29 2022-06-29 6:25:35 6:25:35