Idiomas disponibles
Idiomas disponibles
Assemble as a Vacuum + Mulcher
1. Slide the front and rear vacuum + mulcher tubes together
until the lock button engages (Fig. 4).
Fig. 4
Rear tube
2. Slide the inlet cover lock button forward to disengage the
inlet cover. Hold the cover open (Fig. 5).
Fig. 5
Inlet cover
3. With the blower tube removed, insert the "hooked" side
end of the mulcher tube into the rear clip on the unit.
Securely fasten the mulcher tube by pushing the "wedged"
side end of the mulcher tube up until the lock button snaps
into the locked position (Fig. 6).
Fig. 6
Rear clip +
Hook side
Front tube
Inlet cover
lock button
8
4. Insert the collection bag adaptor into the blower air outlet
until the collection bag is securely fastened (Fig. 7),
then clip the bag to the strap holder. Simply press the tube
release button to remove the bag (Fig. 8).
Fig. 7
Fig. 8
Tube release
button
5. To remove the vacuum + mulcher tube assembly, slide the
inlet cover lock button to unlock, then remove the tube
assembly from its housing (Fig. 9).
NOTE: It may be necessary to remove the blower tube
or vacuum + mulcher tubes to clear a blocked tube or
impeller. Make sure to disconnect the unit from the power
supply before attempting to clear any obstructions.
Fig. 9
Air outlet
Collection
bag adaptor
Collection bag
