Idiomas disponibles
Idiomas disponibles
Assembly
(Continued)
• Save all instructions
ATTACH LOWER HANDLE
1. Loosen the lower handle bolts, if required.
2. Align the lower handle holes to the middle height
adjustment holes in the transmission cover and install
the M10 X 25mm bolts, flat washers, lock washers and
nuts. Tighten all four bolts at this time.
ATTACH UPPER HANDLE
1. Slide the upper handle down over the lower handle and
align the holes.
2. Insert the saddle bolts into the holes as shown and secure
with the handle knobs.
3. Tighten the handle knobs securely.
4. Secure control cables to handle using cable ties.
Questions? Call Toll Free at 1-800-737-2112
(See Figure 4)
(See Figure 5)
If you need assistance or find any parts missing, CALL
TOLL FREE: 1-800-737-2112.
Handle Knobs
Saddle Bolts
Copyright © 2016 MAT Engine Technologies, LLC
9
Height
Adjustment
Holes
Transmission Cover
Lower Holes
Figure 4
Handle Knobs
Saddle Bolts
Figure 5
