Assembly; Assembly Of Pump Kit - Medela Swing Instrucciones De Uso

2. Assembly

Parts you will need for this step:
• Motor unit • Tube
• Breast shield • Connector
• White membrane • Yellow valve
• Breast milk bottle
and lid
Note
• Inspect valves for cracks or chips
and inspect membranes for holes,
tears or warping. If you notice any
damage to these parts, replace them
immediately.
Info
• Carry out all the steps with care and
assemble the pump kit correctly for
optimum performance.
14

2.1 Assembly of pump kit

1
Wash hands before touching
breast pump, kit and breasts
and avoid touching the inside of
containers or lids.
4
Screw bottle onto connector.
Caution
• Wash hands thoroughly with
soap and water before touching
the breast and pump parts.
2
Snap membrane onto
valve until membranes lies
completely flat on valve.
5
Insert PersonalFit ™ breast shield
into top opening on connector.
Questions? Visit www.medela.com or call us at 1-800-435-8316.
3
Push yellow valve securely onto
inner ring of connector.
6
Continued
next page.
Insert hard yellow adaptor end
of tube into connector.
15