TensCare OVA Guia De Inicio Rapido página 17

Idiomas disponibles
  • ES

Idiomas disponibles

Treatment time range - 15-45 minutes or Constant
Waveform
Symmetrical Bi-Polar
rectangular
Output
54mA (1mA for step) zero to
peak (over 500 Ohm load)
Max Pulse Energy
9.5μC
Output plug
Fully shielded: touch proof
Channels
Single channel
Battery
3.7V/550mAh
Weight
Left Stimulator: 39g
Right Stimulator: 37g
Total: 76g
Dimensions
54 x 54 x 18 mm
Safety Classification
Internal power source.
Designed for continuous use.
No special moisture protection.
Software Version
xxxxxxxxxxxxxxxxxxxxxxxxxx
Environmental Specifications:
Operating:
Temperature range: 5 to 40°C
Humidity: 15% to 90% RH non-
condensing
Atmospheric pressure: 700hPa
to 1060hPa
32
Storage:
Temperature range: -10 to 60°C
Humidity: 15% t o 75% RH non-
condensing
Atmospheric pressure: 700hPa
to 1060hPa
Note: The electrical specifications are nominal and
subject to variation from the listed values due to
normal production tolerances of at least 5%.
Note: At least 30min required for the device to
warm / cool from the minimum / maximum storage
temperature between uses until it is ready for intended use.
Storage life
Storage life of an unopened pack of self-adhesive hydrogels
is 3 years. This may be affected by very high temperatures or
very low humidity.
The machine will often last for more than 5 years.
Symbols Used
TYPE BF APPLIED PART: Equipment providing a
degree of protection against electric shock, with
isolated applied part. Indicates that this device
has conductive contact with the end user.
This symbol on the unit means "Refer to
instructions for use".
Temperature Limitation: indicates the
temperature limits to which the medical device
can be safely exposed.
33
loading