Kärcher SC 3 Upright EasyFix Manual De Instrucciones página 9

Button / switch range
1
Switch - Off
2
Switch - On
3
Indicator lamp (red)
4
- Replacement of the decalcifica-
tion cartridge.
RESET button
5
- Setting the water hardness
- Confirmation after changing the
cartridge
LED operating indicator
6
Flashing red - mains voltage pres-
ent and device is heating up
Green - device is ready for opera-
tion
Display for steam stage setting
7
Button for steam stage setting
8
Steam stage 1 - Wood
9
Steam stage 2 - Carpet
10
Steam stage 3 - Tiles/Stone
11
Handle
12
Wall anti-slip handle
13
Steam lever
14
Cable holder with cable fastener
15
Decalcification cartridge
16
Filling hole for water
17
Water reservoir with reservoir cover
18
and carrying handle
Mains connection cable with mains
19
plug
Unlocking button for floor nozzle
20
Floor nozzle
21
Hook and loop fastening
22
Microfiber floor cloth (2 x)
23
Carpet glider
24
Initial commissioning
ATTENTION
Device damage due to calcification
The decalcification cartridge only
works properly if you adjust the device
to the local water hardness before op-
erating it for the first time.
Set the device to the local water hard-
ness.
Set the device to the current water
hardness before using it in an area with
a different water hardness (e.g. after a
move)
1. Insert the decalcification cartridge
into the water reservoir and press it
firmly into place.
1.
2. Set the water hardness, see chapter
Setting the water hardness.
Note
When steaming for the first time after
removing and reinserting the decalcifi-
cation cartridge, the steam jet may be
weak or irregular, and individual drops
of water may be expelled. The device
requires a short warm-up period during
which the decalcification cartridge fills
with water. The steam volume that is
expelled increases constantly until the
maximum steam volume has been
reached after approx. 30 seconds.
English
2.
9