Requisitos previos
If you are replacing a component, remove the existing component before performing the installation process.
Sobre esta tarea
The following image(s) indicate the location of the fan and provides a visual representation of the installation procedure.
Pasos
1. Align the screw holes on the fan with the screw holes on the palm-rest assembly.
2. Replace the two screws (M2x4) that secure the fan to the palm-rest assembly.
3. Route the fan cable through the routing guides on the palm-rest assembly.
4. Connect the fan cable to the system board.
Siguientes pasos
1. Install the
base
cover.
2. Install the
SIM
card.
3. Follow the procedure in
After working inside your
computer.
Extracción e instalación de unidades reemplazables por el cliente (CRU)
67
