Idiomas disponibles
Idiomas disponibles
10 | English
piece. It is also suitable for chamfering edges and for rebat-
ing.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Cutting depth scale
(2) Knob for setting the cutting depth
(insulated gripping surface)
(3) Chip ejector (either right or left)
(4) Lock-off function for On/Off switch
(5) On/off switch
a)
(6) Rechargeable battery
(7) Rechargeable battery release button
(8) Screw for belt cover
(9) Belt cover
(10) Changeover lever for chip ejector direction
(11) Planer base plate
(12) V-grooves
(13) T-handle socket spanner/Torx keys
(14) Fastening screw for clamping jaw
(15) Clamping jaw
(16) Blade head
(17) Guide groove for planer blade
(18) HSS planer blade
(19) HSS planer blade retaining clip
(20) Fastening screw for HSS planer blade retaining clip
(21) Sharpening aid for HSS planer blades
(22) Setting gauge for HSS planer blades
a)
(23) HM/TC planer blade
(24) Parallel guide
(25) Scale for rebate width
(26) Locking nut for rebate width setting
(27) Fastening screw for parallel guide
(28) Extraction hose (dia. 35 mm)
a)
(29) Chip/dust bag
(30) Fastening screw for rebate depth guide
a)
(31) Rebate depth guide
(32) Parking rest
(33) Drive belt
(34) Large belt wheel
(35) Small belt wheel
(36) Handle (insulated gripping surface)
(37) Adapter for converting from HSS to TC planer
a)
blades
(38) Battery charge indicator on the power tool
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
1 609 92A 8GP | (01.06.2023)
Technical data
Planer
Article number
Rated voltage
No-load speed
Cutting depth
Rebate depth
Max. planing width
Weight according to EPTA-Pro-
cedure 01:2014
Recommended ambient tem-
perature during charging
a)
Permitted ambient temperature
during operation
storage
Recommended rechargeable
batteries
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery GBA 18V
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
Values can vary depending upon the product and are subject to ap-
plication and environmental conditions. For further information
www.bosch-professional.com/wac.
Noise/vibration information
Noise emission values determined according to
EN 62841-2-14.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 91 dB(A); sound power level
99 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 62841-2-14:
a
= 3.5 m/s
a)
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
a)
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ac-
cessories or is poorly maintained, the vibration level and
noise emission value may differ. This may significantly in-
crease the vibration and noise emissions over the total work-
ing period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
A)
min
B)
C)
and during
4.0Ah.
(triax vector sum) and uncertainty K
h
2
2
, K = 1.5 m/s
.
GHO 185-LI
3 601 EB5 0..
V
18
–1
14,000
mm
0–2.6
mm
0–9
mm
82
kg
2.6–3.7
°C
0 to +35
°C
–20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
Bosch Power Tools
