Lea LE36255-60DR Manual De Instrucciones página 12

1) Press the unlock button down and hold it in its lower position, and rotate the
rear handle, Rotate the rear handle 90 degrees to the right or to the left.
2) After completing the rotation, release the locking button.
3) Use only as much throttle as is needed to do the job. Excessive engine speed is
unnecessary.
4) Tilting the trimmer 5 to 10° towards the object to be cut will make things
easier and produce good results.
5) Always keep to the carburetor side of your trimmer, and never to the silencer
side.
6) During the first few minutes when a new machine is first used, grease may
come out of the gearbox. Since this is excess grease, it is not a cause for alarm.
Just wipe it off when the engine is switched off.
 Vertical operation
1) When rotating the rear handle to the right, hold the rear handle with your
right hand, and the front handle with your left hand..
2) When rotating the rear handle to the left, hold the front handle with your right
hand, and the rear handle with your left hand. Cut using a circular movement.
10
GB