Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Product may vary slightly from what is illustrated.
1. Spray nozzle
2. Water-fill opening
3. Dry/steam selector
4. Steam button
5. Spray button
6. Pivoting cord
Fabric guide
J
K
J
L
Symbols
K
M
L
O
M
O
7. Temperature-ready light
8. Heel rest
9. Fabric guide
10. Water tank
11. Fabric-select dial
12. Nonstick soleplate
9
How to Use
This appliance is for household use only.
GETTING ST RTED
remove any labels, stickers or tags attached to the body or soleplate of the iron.
Note: Use ordinary tap water for ironing. Do not use water processed through a
water softening system.
Important: For optimum performance, let the iron stand for 90 seconds before
beginning to iron.
g
TO FILL THE W TER T NK
1. Tilt the iron and using a clean measuring cup, pour water into
Dry
2. Plug in the iron. Temperature-ready light glows when iron has
Steam
Tip: if unsure of a garment's fabric, test a small area (on an inside
seam or hem) before ironing.
Spray
FOR STE M IRONING
1. Move the dry/steam selector to the desired steam level (B).
B
2. Turn the fabric-select dial to appropriate setting (between
3. When finished ironing, turn the fabric-select dial to lowest heat
C
a
Important: lways stand the iron on its heel rest when powered on but not in
use.
Surge of Steam
use to remove stubborn creases.
1. With water tank filled to the M X mark, turn the fabric-select dial to at least
setting 4 and wait for the temperature-ready light to go off.
opening until the water reaches the M X level mark on the
water tank ( ). do not overfill. refill as needed.
reached set temperature setting.
4 and 6) for your fabric (C). See fabric guide on the heel
rest and read garment's label to help you determine fabric
J
type. The temperature-ready light glows until it reaches the
appropriate temperature. it then cycles on and off during
K
ironing.
L
setting, move the selector to
and unplug the iron. Stand the
M
b
iron on its heel rest and allow it to cool off.
O
10
Tabla de contenido
