Oase Waterfall 30 Instrucciones De Uso página 7

Intended use
Only use the product described in this manual as follows:
• Only operate with water at a water temperature of +4 °C to +35 °C.
• While adhering to the technical specifications.
Product Description
Overview
 A Waterfall Illumination 30, 60, 90
1 Light rail
2 Holder, right, left
3 Power cord
4 Transformer
Properties
Waterfall Illumination 30, 60, 90 allows the illumination of a suitably dimensioned artificial waterfall at its source with a
warm white light.
Installation
NOTE
The unit will be destroyed if it is operated with a dimmer. It contains sensitive electrical components.
 Do not connect the unit to a dimmable power supply.
How to proceed:
 B, C
1. Plug the holders onto the light rail.
– Do not mix up the right and the left holder.
2. Place the light rail into the source bed of the waterfall from above. Ensure that the holders are correctly placed in the
source bed.
3. Install the transformer at a minimum safety distance of 2 m from the water.
4. Connect the connection cord of the unit to the safety transformer.
Commissioning/start-up
Switching on the unit: Plug the power plug of the transformer into the socket. The unit switches on immediately.
Switching off the unit: Disconnect the transformer power plug.
- EN -
Quantity
1 x
2 x
1 x
1 x
7