Idiomas disponibles
Idiomas disponibles
18. Do not place on or near a hot gas or electric burner, or in a heated oven.
19. Always attach plug to appliance first, then plug cord into the wall outlet. To
disconnect the machine, turn the control to "off", then remove plug from
wall outlet. Do not yank cord, instead grasp plug and pull to disconnect.
20. Do not use the machine for other than intended use.
21. Do not pour liquids other than water and descaling solutions specified in
this manual into the water tank.
22. Protect the machine against humidity or freezing conditions.
23. This machine is intended for household use only.
CAUTION
SAVE THESE INSTRUCTIONS
This machine is intended for household use only. Any servicing other than cleaning and user maintenance should be performed
by the nearest authorized KRUPS Service Center.
Visit our website at www.krupsusa.com in the USA or www.krups.ca in Canada or contact your respective countries Consumer
Service department for the service center nearest you.
To reduce the risk of fire or electric shock, do not dismantle the machine. Repair should be done by an authorized KRUPS
Service Center only.
SHORT CORD INSTRUCTIONS
A. A short power-supply cord (or detachable power-supply cord) is to be provided to reduce risks resulting from becoming
entangled in or tripping over a longer cord.
B. Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
C. If a long detachable power-supply cord or extension cord is used:
1) The marked electrical rating of the longer detachable power-supply cord or the extension cord should be at least as great
as the electrical rating of the machine.
2) If the appliance is the grounded type, the longer detachable power-supply cord or the extension cord should be a
grounding-type 3-wire cord.
3) The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by
children or tripped over.
In the interest of improving products, KRUPS reserves the right to change specifications without prior notice.
2
