MOB MO9238 Manual Del Usuario página 3

anuals and user guides at all-guide
Product specifications
Size:
Micro input：
USB output：
Type-C input：
Wireless Input:
Wireless Output:
Capacity:
Battery:
Material:
LED indicator
Press button 1 time to turn on the light; Press button 2 times
quickly again, turn off the light.
Charge the built-in battery:
Charge mobile phone with this product according to the following
steps:
• We provide Micro USB cable. Select the correct connector and
connect it with the other end of the USB cable. You can also use
the devices original cable to connect the product with your
device directly.
• If the power bank is charging, the blue indicator lights are
flashing. You also can see the charging indicator from your
mobile phone.
• During charging, LED will show the current power situation, if
the battery is full, all four blue indicators will be lit
• Please remove the power source after full charging
• Charge time may vary per device
Battery capacity indicator:
To check the charging status of the charger, press the switch
button (4).
If all the four blue indicators are lit this indicates the built-in battery
is full; if three blue indicators lit there is 75% of power left. If two
blue indicators are lit there is 50% of the power left, if only one
indicator is lit there is 25% of power left.
Attention
(13.5cm x 7.3cm x 1.8cm)
5V 2.1A
5V 2.1A
5V 2A
0.75A
1A
8000mAh/29.6W
Li-Polymer battery
ABS with Rubber finished