Idiomas disponibles
Idiomas disponibles
2
Installing your appliance
Arrange the electrical power supply within the
dimensions of the decorative flue. If your appli-
ance is to be installed in the ducting version or
in the version with external motor, prepare the air
exhaust opening. Adjust the width of the support
bracket of the upper flue (Fig.3). Then fix it to the
ceiling using the screws A (Fig.3) in such a way
that it is in line with your hood and respecting the
distance from the ceiling indicated in Fig.2. Con-
nect the flange C to the air exhaust hole using a
connection pipe (Fig.5 - Stage 2). Insert the upper
flue into the lower flue.
Fix the lower flue to the hood using the screws
B provided (Fig.5 - Stage 2), extract the upper
flue up to the bracket and fix it with the screws
B (Fig.3). To transform the hood from a ducting
version into a filtering version, ask your dealer for
the charcoal filters and follow the installation in-
structions.
Filtering version:
Install the hood and the two flues as described in
the paragraph for installation of the hood in duct-
ing version. To assemble the filtering flue refer to
the instructions contained in the kit. If the kit is
not provided, order it from your dealer as acces-
sory. The filters must be applied to the suction unit
positioned inside the hood. They must be centered
by turning them 90 degrees until the stop catch is
tripped (Fig.8).
Cooker Hood / User Manual
9 / 30 EN
