VMI CUBE Manual página 75

2. Changing preheating settings using the control unit
Access the SETTINGS menu by pressing the button on the control unit twice (press and
•
release twice) and then by pressing the button again and holding for 3 seconds (press
and hold).
Select the temperature pictogram.
•
Use the dial to select the required temperature subject to available values.
•
Press the button to confirm.
•
To disable preheating, select the
•
The temperature will stop flashing to confirm that it has been accepted by the VMI
•
the latter is not the temperature selected, it means that the control unit has ignored the
change. The operation will need to be repeated.
SETTING
pictogram.
Turn
the dial
SELECTING
THE
TEMPERATURE
® . If
Press
the button
75