VMI CUBE Manual página 73

C. Activating/deactivating preheating and modifying the preheating
temperature for the VMI
This operation can be carried out using the VMI+ application and on the control unit.
1.
PAIR
PAIR
PAIR
PAIR
PAIR
PAIR
® unit
Changing preheating settings using VMI+
Step 1: Log in to the application
Once you have downloaded the VMI+ mobile application, you
•
can open it.
Select the PRIVATE CUSTOMER tab.
•
Accept the TERMS AND CONDITIONS OF USE and the
•
PRIVACY POLICY.
Press LOGIN.
•
Step 2: Pairing
• A VMI CUBE pairing page will open.
®
• Select the VMI
methods are available:
o Press the
for a few seconds visually indicating which VMI
ready for configuration.
o If you cannot see the halo, place the smartphone as near
to the VMI unit as possible. Press the SCAN button on the
VMI+ application and the VMI to be configured
corresponds to the unit with the number closest to 100.
• Click on the PAIR button for the VMI identified.
® CUBE to be configured. Two identification
icon. The VMI light halo will flash in green
CUBE is
®
73