RECESS MOUNTING
These instructions are for recess mounting your cabinet.
1. Make rough opening and frame on all sides. Find the specific model dimensions to make rough opening (page 3).
NOTE: Ensure that the cabinets are mounted so that the doors have at least 1" (25mm) clearance from the top of the faucet and at
least 1" (25mm) clearance from the ceiling.
2. Electrical Option Cabinets: Provide a separate electrical connection for electrical options and lighting. Pull electric wire through the
hole. Be sure to provide enough wire to make proper and safe connections to Portray Electric Upgrade.
WARNING: An Electrical option cabinet must be wired to a Class A 20 Amp GFCI (Ground Fault Circuit Interrupter) protected circuit
when used in bathrooms and all other locations required by the National Electric Code.
1
2
Rough Opening
1" (25.4 mm)
Minimum from
finished ceiling
Field Wiring
(For Electric Option)
Rough Opening
Centered in opening
1-1/4"
1" (25.4 mm)
Minimum door
to faucet
Part no. CB-209-1349 10/30/20
PL Portray Series Cabinet Ganging Recess Mount Kit
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
5
Installation instructions
