Idiomas disponibles
Idiomas disponibles
1.2
Before starting a washing program make sure that:
Warning:
during the initial phase of the washing program, the operation of sprayers
is not perceived because they start rotating about 5 minutes after the start.
This is the normal operation of the washing cycle.
QUICK PROGRAMS OPTION
Select this option together with any washing program (except the soak
program) to SHORTEN the cycle by from a minimum of 10% to a
maximum of 55%, depending on the cycle selected. To activate this
option, press the QUICK PROGRAMS OPTION button
on) after selecting the program required. The option is automatically
deactivated at the end of the program.
ENERSAVE OPTION
This option can be selected with the wash programme of choice to further
reduce energy consumption. Drying is aided by a special device that
automatically releases the door, which opens slowly and smoothly by a
few centimetres. This ensures perfect drying and greater control of rinsing
temperatures, which can be kept at lower levels for significant energy
saving.
Once the door has opened, the dishwasher
emits a short beep and programme lights nos.
4 and 5 flash to indicate the end of the
washing cycle.
Enersave is activated automatically every time a wash cycle is selected
(except for programs that do not include the final drying phase; see
programs table) and can be disabled before the program is started.
8
User instructions
Washing programs
The water supply tap is open.
The correct amount of detergent has been added to the
dispenser.
The baskets have been correctly loaded.
The spray arms are able to rotate freely and without
obstruction.
The dishwasher door is securely closed.
(light comes
