Idiomas disponibles
Idiomas disponibles
How to Clean up the Grinding Tank
Note: the grinding tank is not detachable and not waterproof.
So it cannot be rinsed directly with water!
tank with a cleaning brush first, and then wipe the inside with dry cloth.
After using blades for a long time, you could remove blades and clean
them with water. (
unless severely worn, there is no need to replace the
Firstly, use a screwdriver to unscrew one of the screws in the middle
●
of grinding tank and lift it up to jam the short blade and Drive the
wrench or socket counter-clockwise to loosen the locknut on the
blades.
Secondly, wipe the grinding tank with a dry cloth after removal of the
●
blades, and please do not rinse the inside with water directly.
Please Note: If you clean the blades by using the wet cloth or with
water directly, please make sure grinding tank and the blades be
dried enough before re-install the blades.
Lastly, install the blades and tighten the locknut, it is finished.
●
The blades of the new grinder might be very tight,
15
Please clean up the grinding
blades.)
