Idiomas disponibles
Idiomas disponibles
5 .
For Grinding Oily Materials ( such as walnuts, sesame, peanuts, etc)
Not recommended!!!
only process dried materials. Materials with HIGH OIL CONTENT
may stick to the blades when high speed grinding
If you insist in try, before grinding, it is better to bake the oily materials
in microwave (or dry in the sun). After the material is completely cool,
you can grind them. The drier the material, the better the grinding effect.
And we recommend you mixing the baked oily materials with some other
dry materials to grind together, such as rice or black rice, absorbs oil.
Use interval grinding method, that is Pause about 5 seconds after every
10 seconds working and check the grinding effect until you are satisfied.
6 . For Grinding Super-hard Materials (such as pearls, tortoise shells,
Tianqi, Panax notoginseng, etc.)
It is recommended to crush them into small pieces before grinding. And
during grinding, pause about 10 seconds after every 1 minute working.
The grindingjob can be completed in 2-3 minutes.
7. For Grinding Fibrous Materials (such as Dendrobium
Ganoderma lucidum, etc.)
Because this type of material itself has a fibrous structure, it cannot be
ground into powder state, and usually it will be ground into flocs.
Use interval grinding method, pause about 10 seconds after every 1
minute working. Check whether the blades are stuck by flocs every
minute of grinding.
Because our grinder is a dry grinder that can
13
