Truma SecuMotion Instrucciones De Uso página 14

Installing and connecting
the regulator
The regulator system must be
installed so that the regulator in-
let is at least at cylinder valve
height.
Positioning SecuMotion
above the cylinder valve
helps prevent gas in the liquid
phase from entering the low
pressure area, especially when
driving. The use of 10 mm di-
ameter gas pipes will improve
the performance of all attached
devices. When using outdoors,
use a protective hood or similar
device to protect the regulator
from the elements.
14
– Attach high pressure hose
(only with hose-break safety
device!) to the regulator inlet,
using an angle union (a) if
necessary (see "Accessories").
a
– Choose a suitable position for
the regulator, in particular: the
type plate is visible, the gas-
flow monitor's button is visible
and easily accessible, avoid
damage when changing cyl-
inders, thwart penetration by
gas in the liquid phase, plan
for a place to add DuoComfort
at a later time, avoid tension in
the high pressure hose.
95 mm
– Attach regulator to the wall
with two screws.
– Connect the 8 mm or 10 mm
gas supply pipe to the regula-
tor outlet according to the
respective installation instruc-
tions for cutting-ring screw
fittings. When tightening,
carefully use a second wrench
to counterhold on the key
surfaces provided for this
purpose.
– After installing the regulator,
check the gas system for
leaks (see "Checking the low