Cleaning And Maintenance - Mx Onda MX-PM2780 Manual De Instrucciones

9. When you notice that there are no more popcorn, turn off the popcorn
machine by means of the switch 1. Open the main door and with the
handle of the kettle 3, tilt the tray to empty it of the popcorn that may be
inside the kettle.
10. Repeat steps 4 to 9 as many times as necessary, to prepare the desired
amount of popcorn.
11. Serve the popcorn according to your preferences, as they leave the
machine or add salt, pepper, sugar, caramel, etc.
INNER LIGHT
To turn the inner light on or off, press the inner light on / off switch 2.

CLEANING AND MAINTENANCE

1. Unplug the popcorn machine from the mains and wait for the time
necessary for it to be completely cold before cleaning it.
2. Remove the kettle as indicated in the section "INSERTION AND
EXTRACTION OF THE POPCORN KETTLE".
3. With a kitchen paper napkin, remove any traces of oil and popcorn that
may be inside and outside the kettle.
4. Clean the inside and outside of the kettle with a cloth lightly moistened with
soapy water, then dry it with a cloth.
5. Clean the inside of the popcorn machine with a cloth slightly moistened
with soapy water, then dry it with a cloth.
6. The housing or outside of the popcorn machine can be cleaned with a
slightly dampened cloth.
7. Wash the dosing pans with soapy water.
8. Replace the tray in its housing.
Note:
Do not use scouring pads as they can scratch and damage surfaces, nor use
abrasive products, alcohol, solvents or gasoline. Dry all surfaces carefully
with a soft cloth.
7