Automatic Memory Storing& Program Scanning; Manually Store Station & Recall Preset Station; Rds (Radio Data System) Operation - Blaupunkt MADRID 170 BT Manual De Instrucciones

OPERATION
station automatically.
seconds until
"MANUAL" appears on the display, the
manual tuning mode is selected. In this
mode you can turn up/down a step
frequency one by one till searched a
station. If both buttons have not been
pressed for 5 seconds, it will return to
seek tuning mode and "AUTO" appears
on the display.
 AUTOMATIC STORING &
PROGRAM SCANNING
- Automatic storing
- Press TS button (2) for 2 seconds the
radio searches
frequency and
strength until one cycle search is
finished. And then some strong stations
are stored into the corresponding preset
number button of the FM3 band. In the
first cycle it will in LOCAL mode to
receive the stronger station. If it is less
than 6 pcs station it will searching
nd
stations in 2 cycle in LOCAL OFF mode.
- Program scanning
Press TS button (2) shortly to scan
preset station. The radio is holding at
that preset number for 5 seconds with
release mute.
 MANUALLY STORE STATION &
RECALL PRESET STATION
To received a station, Press one of the
preset button (1~6) for 2 seconds. The
current station is stored into the number
button. Shortly press the preset button
(1~6) to directly listen the station that
saved in the corresponding preset
button.
RDS (RADIO
OPERATION
 Setting RDS mode
In AF item of system menu. Rotating
Press for 2
from the 87.5MHz
checks the signal
DATA SYSTEM)
audio knob to switch on or off the AF
function.
Whenever AF is on, symbol "AF"
appears on the display.
Program name is displayed on receiving
a RDS station.
"AF" starts blinking if the broadcasting
signal getting worse.
"ALARM" will be displayed when an
emergency broadcasting is received,
meanwhile sound output level will be
adjusted to the preset output level
automatically when the volume control
is set at minimum.
 Regional Program Operation
When AF function is on. In REG item of
system menu. Rotating audio knob to
turn the REG function on or off. When
AF function is off. The REG function can't
set to off.
Some broadcasting stations change
their program from normal broadcasting
to regional broadcasting for a certain
time period. When region is on, the
current listening
unchanged. When region is off, it allows
the reception moves to the regional
station.
 Listening to Traffic Announcement
In TA item of system menu. Rotating
audio knob to switch on or off the TA
function. When TA mode is on and a
traffic announcement is transmitted:
When the unit was in CD (MP3) or AUX
mode, it will switch temporarily to radio
mode.
Temporary switch over to an EON linked
station when EON detects a traffic
announcement on that other program.
If the volume level was under the
threshold point it will be raised to the
threshold point.
When TA mode is on, TA of individual
segment is turned on. When a TP station
is received, TP of individual segment is
turned on.
7
program remains
E
N
L
I
S
H