Idiomas disponibles
Idiomas disponibles
ENGLISH
Standard assembly where the device hangs from a straight flat ceiling.
Standard assembly
Support
Angled assembly where the device hangs from a vaulted or angled ceiling.
Angled assembly
Support
Mounting bracket assembly
Wooden ceiling
Fig. 4.
Use the 4 provided self-tapping screws with its corresponding 4 washers to fix the mounting
bracket to the ceiling.
Concrete ceiling
Fig. 5.
Drill 2 8-mm holes on the concrete ceiling.
Cover the surface of the bolt with epoxy resin and introduce them in the drilled holes.
Let them sit for the time indicated on the product's box.
Then, introduce the visible part of the bolts in the mounting plate's holes.
Fix the mounting plate to the bolts by screwing first the regular washer, then the lock washer
and finally the nut.
Hanging the fan
Fig. 6.
Electric wiring
Canopy
Decorative cover
Hanging ball slot
Stop pin
Stop pin clip
Adapter
Screws
Note: If you wish to extend the fan's hanging length, remove the hanging ball from the downrod
provided and use the extended down rod (included).
Remove the hanging ball from the down rod by loosening the screws in it and remove the stop
pin's clip and the stop pin.
Slide down the hanging ball from the original down rod to remove it.
29
ENERGYSILENCEAERO 540
