View Last Test Results; Understanding Test Results; Battery Test Results - Tecnotest 3167 Manual Operativo

________________________________________________________________________BATTERY TESTER
3.5 -

View last test results

The VIEW LAST TEST function displays the test results of the last test performed.
To view the last test results, follow these steps:
1. If necessary, press the ON key to turn the tester on and display the main menu
(if the tester is already on, press the MENU key to display the main menu).
NOTE:
The word GO indicates the selected item.
2. Use the Up and Down Arrow keys to select VIEW LAST TEST and then press
the GO key. This displays the test results.
3. If necessary, use the Down Arrow key to scroll through the test results.
4. If you have the printer, optionally print the test results.
5. To return to the main menu, press the MENU key.
6. Select another test or disconnect the clamps from the battery (if connected).
7. Press the OFF key to turn the tester off (the tester turns off automatically after a
few minutes of inactivity).
3.6 -

Understanding Test Results

This section includes descriptions for test results and tips for solving problems.

BATTERY TEST RESULTS

•
BAT. GOOD: the battery is in good condition and can hold a charge. This also
indicates that the charging system, cranking system, and diode test will be
unaffected by the battery condition.
•
BAT. GOOD/LOW CHARGE: the battery is in good condition but needs charging
(the battery charge is above 15% but not close to the full nominal capacity).
•
BAT. CHARGE & RETEST: the battery is almost fully discharged and the battery
condition cannot be determined reliably (the battery charge is below 15% of the
nominal capacity). Charge the battery and repeat the test.
OPERATING INSTRUCTIONS
IN VEHICLE
QUICK TEST
MULTIMETER
VIEW LAST TEST
BATT. GOOD
OCV. 12.5
BAT. CODE CB6A6311
MORE RESULTS
GO
CCA 709

53