Idiomas disponibles
Idiomas disponibles
Also make sure you have read the user manual carefully, to ensure you know how to ride
it in a safe and fun way.
The Electric scooter is for domestic use only.
lt is your responsibility to be aware of and comply with all regulations. lf there are no
regulations for this Electric scooter in your country, please take care of your own safety
and the safety of others. Also pay attention to other people. Always ride safely and only at
a speed that allows you to brake safely at any time. A common thing for such products is
that there is a risk that you may fall off the product and injure yourself. Always ride as
safely as possible.
lf lending the electric scooter to friends and family, please make sure they use proper
protective gear and know how to ride it.
Before riding the electric scooter, please check that all parts are working as supposed to.
lf any loose parts, abnormal noise, reduced battery life etc. are detected, please contact
your retailer for product service and warranty. Do not repair the electric scooter yourself.
lnspect the rear tire, rear brake, and brake pad according to Section 7 of the maintenance
specification in this operating instructions. The electric scooter may become unstable if
the rear brake is deformed or loose. This is beca use the distance between the brake pad
and the rear wheel becomes too small, possibly leading to a blocked rear wheel.
Avoid applying too much force or stepping on the rear fender permanently. This may
cause the fender to loosen or damage the spring holding the fender.
As a result, the brake pad constantly touches the wheel and the motor temperature
increases due to the additional resistance. The rear tire can also get loose if the brake is in
constant braking position.
Avoid constant braking. As a result, the tires will not only wear off, but also become hot.
This will soften the rubber and it will no longer have the same grip on the road as usual.
Do not touch the tire after braking.
lf you hear unusual noises or notice friction when switching on the electric scooter, a
bearing may be damaged. A worn bearing may even be indicated by strong vibration of
the handlebar. In this case, please contact your retailer since the bearing needs to be
replaced and/or the handlebar checked and adjusted.
Ride the electric scooter only on a dry surface since otherwise the riding safety and
braking performance may be impaired and the motor or bearings may be damaged.
Please do not ride up or down long and steep slopes.
Stop riding when you receive the "Low Battery Warning". The electric scooter then moves
only slowly and does not have the same traction as normal and the electric brake does
not work. In this case, please use the rear brake to stop the electric scooter. Get off the
Electric scooter as soon as the speed allows to do that safely.
Do not use the electric brake and the throttle at the same time.
A normally working Electric scooter operates safely and quietly. lf you hear noises or
notice bumpy operation, please check wheels, bearings, and brakes. Contact your
customer service for repair and maintenance, if necessary.
7. Maintenance
To ensure you get the best possible performance and experience from your electric
scooter, it is important to do regular maintenance for important parts of the product.
-Battery maintenance
-Bearings, Screws, Brakes and Wheels
-Storage and Cleaning
Your electric scooter will require sorne maintenance so please read and familiarize yourself
with this guide.
Battery maintenance:
AII batteries have a life cycle, and performance will decrease over time, however here are
sorne advice to maximize the life span of the battery.
