Idiomas disponibles
Idiomas disponibles
PROblEm
1. When the product is plugged
in, the indicators of the control
unit do not light.
2. The product does not
warm up.
3. after a period of proper
functioning, the product stops
warming and all the lED
indicators go off.
Before cleaning the product remember to unplug it from the mains.
Do not dry clean the product. Do not use strong detergents or cleaning agents containing
solvents.
Heating oveblankets are hand or machine washable, after having detached the control unit.
The control unit is not washable. Prevent the control unit from getting wet or moist.
The product should not be used in case of wet or damp. If the product gets wet, do not
wring it out to dry it, do not use tumble dryers and never iron or switch the product on to
dry it. To dry the product extend it flat or hang it on a line avoid folding it.
machine washing: select a programme for delicate garments, at 30º C.
hand washing: use a soft detergent and rub or brush softly and always in the direction of
the internal wiring. Never wring the product.
After washing, to dry the product extend it flat or hang it on a line avoid folding it.
To get smaller stains out you may prefer using a cleaning foam instead of washing. Apply the
foam regularly on the product's surface using a moist cloth or sponge, and then brush it in
the direction of the internal wiring
TROUblEShOOTING TablE
Check whether your mains socket has power; check whether
the product is plugged in correctly. Unplug the product and
wait a few seconds, then plug it in again and push the button on
the control unit to the desired temperature setting.
make sure the product is operating by checking whether a lED
indicator of the control unit is lit. Remember that the safety
aUTO-Off function may have switched the product off if the
safety time period is over. If all the lED indicators are off, push
the button to switch the product on. In case of any doubt, reset
the product by unplugging it from the mains and plugging it in
after a few seconds.
Remember that quick checks carried out with the product
uncovered are not reliable. Try to cover the product with a
blanket or a towel and wait at least 30 minutes. If you still do
not perceive heat, take the product to an authorized service
centre.
In order to ensure safety in use, all our products are provided
with a safety aUTO-Off option which switches the product off
after 12 hours of continuous operation. See SafETY aUTO-
Off paragraph for details.
If you want to turn on the product, just push the button on the
controller.
ClEaNING
13
EN
SOlUTION
ENGlISh
