Idiomas disponibles
Idiomas disponibles
15. Do not cover the control unit while operating the product; do not place it on the heating element or
under it while the unit is in operation.
16. Do not leave the product unattended while in operation.
17. In any case avoid wetting the control unit.
18. Do not touch the control unit with wet hands while the product is plugged in.
19. Do not use the product in excessively humid environments or in environments where the risk of
splashing liquids on it is high (e.g. bathrooms, showers, swimming pools). In the presence of bottles or
glasses with beverages, take care not to splash them on the control unit.
20. Do not expose the product to environmental agents (rain, sun, etc.).
21. Unplug the product from the mains when not in use.
22. Before cleaning the product make sure it is unplugged from the mains.
23. Cleaning instructions are found in a specific section of this manual.
24. Protect the power cord from scraping against sharp edges and from coming into contact with very
hot objects that could damage it.
25. Do not pull on the power cord or use the heating part itself to pull and unplug the product from the
mains.
26. Do not hold the product by the power cord to move or carry it.
27. If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified personnel in order to avoid any hazard.
28. Inspect the product frequently for signs of wear or damage. If these signs appear, do not use the
product and take it to an authorized service centre.
29. This product has no parts intended to be repaired or replaced by the user. If any part of the product
fails, or the product does not perform properly, or there is any other kind of anomaly, do not attempt
to repair it and instead take the product to an authorized service centre.
30. The product must be returned to the manufacturer or his authorized agent if the fuse of control unit
has ruptured.
31. For any further information, please consult our customer service.
Lay the product directly on the bed aligning it with the feet edge (see fig. 1).
The power cord will come out from the side, approximately at your shoulder level when
lying down normally.
Make sure the product has no folds or creases. Check whether the power cord reaches the
nearest mains socket. If necessary, you can turn the product so that the power cord comes
out at the feet side.
Do not fold the product under the mattress.
If possible, do not use the product on adjustable beds or on twin mattresses; if this is the
case, make sure the heating part and the power cord do not get nipped or damaged.
1) Plug the product into the mains socket, making sure your mains' specifications corres-
pond to those of the product stated on the label.. First connect the power cord to the
product and then to the mains socket. Use only the control unit originally provided with the
product.
2) If everything is correct the control unit is then automatically set at the level 0 which
indicates that the product is switched off. All LED indicators will go off.
INSTallaTION INSTRUCTIONS fOR
hEaTING OvERblaNkET
OPERaTING INSTRUCTIONS
11
EN
ENGlISh
