BOMANN WKS 1963 CB Instrucciones De Servicio página 22

Hervidor de agua
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
WARNING: Danger of scalding!
When pouring the water out, keep the lid closed.
During operation the housing becomes hot. Do not touch it
and allow the device to cool down before storing it away.
Switching off
If you do not wish to use the kettle any more, please turn the
switch to 0 (off) and then remove the plug from the socket.
The control lamp goes off.
Emptying the water container.
Mains Cable Take-up Device
The mains cable can be wound up on the base.
Always pull out the plug from the socket before clea-
ning!
The exterior of the machine should be cleaned, if necessary,
with a slightly damp cloth without additives.
The interior can be cleaned either with a damp cloth or with
detergent.
There is a permanent fi lter in the spout. Open the lid to
clean the fi lter. In order to be able to remove the fi lter, press
down the outer „lug" above the fi lter and then pull it towards
the inside. Rinse out the fi lter with running water. Put it back
in position, ensuring that it is correctly clamped down at the
edge.
Decalcifi cation
The frequency of the decalcifying operation depends on the
hardness of the water and on how often the appliance is
used.
If the machine switches off before the water boils, it probably
needs to be decalcifi ed.
Please do not use vinegar but a commercially available
decalcifi cation agent on the basis of citric acid. Only use the
quantities stated in the instructions.
NOTE:
After descaling the device boil fresh water in it several times
(approximately 3-4 times) in order to remove any residues. Do
not consume this water.
Troubleshooting
It is not possible to switch the machine on.
Possible Cause:
After being used without or with too little water the machine
has not cooled down suffi ciently.
Remedy:
Allow the machine to cool down for 15 min.
22
05-WKS 1963 CB.indd 22
05-WKS 1963 CB.indd 22
Cleaning
The machine switches off before the water has boiled.
Possible Cause:
The heated base is coated with too much lime or the circuit
of the plug is overloaded.
Remedy:
Descale the machine as instructed.
Check the mains connection.
The machine does not switch off.
Possible Cause:
The lid is not closed.
Remedy:
Close the lid.
Technical Data
Model: ..................................................................... WKS 1963 CB
Power supply: ............................................................230 V, 50 Hz
Power consumption: ..........................................................2200 W
Protection class: ........................................................................... Ι
Filling quantity: .........................................................max. 1,5 Litre
Net weight: ........................................................................1,08 kg
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the
environment and human health.
This will contribute to the recycling and other forms of reutilisati-
on of electrical and electronic equipment.
Information concerning where the equipment can be disposed of
can be obtained from your local authority.
08.09.2008 9:29:51 Uhr
08.09.2008 9:29:51 Uhr
loading