Tabla de contenido
Idiomas disponibles
Idiomas disponibles
_______________________________________________________________________________
Manual Scan
1. Press
button to turn on the Analyzer.
2. Properly connect the pair of Kelvin clips to the solar panel and the Analyzer. The red Kelvin
clip is for positive pole and the black Kelvin clip for negative pole.
3. Press
button to enter the SETUP menu: (Type in the current range for scanning)
Current Range of Scan begin:200mA
Current Range of Scan end:548mA
After setting up the current range, press
Note: If the "Current Range of Scan begin" is over "Ishort", then the scanning will not be
performed and no result will come out.
4. Press
(SCAN) button to start MANUAL SCAN. The analyzer run simulation from
the BEGIN value to END value, and draw I-V / V-I curve and P-V / P-I curve in LCD. Users
can move the cursor to review each individual values along the curve.
After the scanning is finished, the result will come out like below.
©Copyright Abacanto Digital SA.
button again to exit the SETUP menu.
Manual de usuario AD210
AD Instruments
14
Capítulos
Tabla de contenido
