Tabla de contenido
Idiomas disponibles
Idiomas disponibles
_______________________________________________________________________________
A-2
Afterward, if users are interested in a specific operating range, they can enter the
beginning and ending values of scan in the setup menu. Press SCAN (
the specific range.
Press
button to turn on the Analyzer. Properly connect the pair of Kelvin clips to the
solar panel and the Analyzer. The red Kelvin clip is for positive pole and the black Kelvin
clip for negative pole.
Press
button to enter the SETUP menu: (Type in the current range for scanning)
Current Range of Scan begin:200mA
Current Range of Scan end:548mA
After setting up the current range, press
Note: If the "Current Range of Scan begin" is over "Ishort", then the scanning will not be
performed and no result will come out.
Press
button to start MANUAL SCAN. After the scanning is finished, the result will
come out like below.
©Copyright Abacanto Digital SA.
button again to exit the SETUP menu.
Manual de usuario AD210
AD Instruments
) button to test
10
Capítulos
Tabla de contenido
