Tabla de contenido
Idiomas disponibles
Idiomas disponibles
_______________________________________________________________________________
A-3
If users are interested in a specific point of test current, users can enter the current
value for a Single Test Point. Press TEST (
Press
button to turn on the Analyzer. Properly connect the pair of Kelvin clips to the
solar panel and the Analyzer. The red Kelvin clip is for positive pole and the black Kelvin
clip for negative pole.
Press
button to enter the SETUP menu: (Type in the testing current)
Point:609mA
After setting up the current value, press
Press
button to start Testing a Single Test. After the testing is finished, the result will
come out like below. The result (P, V, I) is shown in reverse video as below.
©Copyright Abacanto Digital SA.
) to test the characteristics at the current.
button again to exit the SETUP menu.
Manual de usuario AD210
AD Instruments
Single Test
11
Capítulos
Tabla de contenido
