SUHNER ABRASIVE LWE 10-TOP Documentación Técnica página 22

Ocultar thumbs Ver también para LWE 10-TOP:

Idiomas disponibles

aged, which do not run true or which vibrate!

3.3 w

orKing instructions

On failure of the compressed air release the valve

lever! To achieve an optimum result, move grin-

ding tool uniformly back and forth with light pres-

sure. Excessive pressure lessens the working capability

of the machine, as well as the life of the grinding tool.

4. S

ERvICE

4.1 P

reVentiVe mAintenAnce

Without a tool clamped in check no-load

speed periodically and after each mainte-

nance. Even if the machine still operates

perfectly, the motor should be removed, cleaned and the

four slides checked for wear by a specialist after approx.

300 to 400 operating hours. The lubricant in the gear

head (Isoflex NBU 15) should be replaced at the same

time (do not wash out!).

4.1.1 r

ePlAcement of the exhAust Air hose

Detach the exhaust air hose from the swivel ring, and re-

place it.

4.1.2 r

ePlAcement of the suPPly hose

Remove the exhaust air hose (see 4.1.1).

Detach the hose clip, and pull the supply hose off the

connection nipple.

/ m

aINTENaNCE